IBM i 830

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5A58 Time-out; data-set-ready not received FI00701
FI00704
FI00719
AJDG301
5C68 Procedure error in Licensed Internal Code AJDG301
FI00730
5E00 Wrong or no external communications cable installed FI00701
CNGASPT
CNGSLPT
FI00719
5E01 Call received during dialing procedure GNGRESC
FI00704
FI00701
FI00719
6210 Resource or storage not available CNGMAXI
FI00730
6212, 6214 Communications controller error FI00730
FI00718
6288 Port not operational FI00719
AJDG301
CNGSLPT
6320 Abandon-call-retry FI00700
CNGTEL
FI00703
FI00719
FI00702
6322 Abandon-call-retry; not all numbers dialed CNGTEL
FI00703
FI00702
FI00719
FI00730
6870 Automatic call unit power turned off FI00703
FI00702
FI00719
6890 Data-set-ready dropped on modem interface
No action is required if Operations Console is attached.
GNGLINK
FI00701
FI00704
FI00719
6C05 I/O card Licensed Internal Code error FI00730
AJDG301
6C0A Hardware detected failure FI00719
FI00718
7200 Communications Configuration CNGSLPT
7210 Resource or storage not available CNGMAXI
FI00730
7212 Procedure error in Licensed Internal Code AJDG301
FI00730
7C00 Asynchronous server program ended abnormally FI00730
7C02 Wrong command sent by Licensed Internal Code FI00730
B003
188
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1