Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5715 Remote equipment did not respond causing an idle-time-out GXCLINK
CXCRPTO
FI00701
FI00704
CXCMRTY
FI00705
CXCENCD
FI00700
CXCDTAR
FI00719
5718 Retry limit reached for sending frames to remote equipment GXCLINK
FI00705
FI00704
FI00700
CXCMRTY
FI00719
FI00701
5719 Retry limit reached for sending frames to remote equipment FI00700
5720 Retry limit reached for sending poll frame to remote FI00700
CXCMODU
5721 Could not send frame to remote equipment; local problem FI00704
CXCDTAR
FI00701
FI00719
FI00730
5722 Wrong command value sent by OS/400 licensed program AJLAG01
CXCSTAD
A000 Too many devices active on the workstation IOP GXCBBBB
B000 WS IOP fails to report part, model and serial number
Perform “WSAC-PIP1” on page 477.
FI00615
C000, D000 WS IOP error not known AJLAG01
D001 Wrong or no external communications cable installed FI00631
AJLAG01
F003 WS IOA buffer utilization threshold exceeded temporarily AJLAG01
FFFF User believes there is a problem
Reference code FFFF is assigned by the ANZPRB (Analyze Problems) for
user-detected errors. Run ANZPRB again if the problem still exists or look
in the problem log (WRKPRB) for possible failing FRUs.
UXCFF00
Workstation Adapter Console Failing Items
Notes:
1. To determine the failing items, go to “Failing Items” on page 479.
2. To determine the associated part numbers, go to “Type, Model, and Part
Number list” on page 885.
3. To determine the parts associated with symbolic FRUs, such as “ANYBUS”,or
“DEVTERM”,goto“Symbolic FRUs” on page 495.
B075
206
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
Need help?
General