Locations — Power Distribution Unit (PDU)
Addresses — Models 830, SB2 System Unit with FC 9074
Base I/O Tower
Use the address to find the location. Then go to Table 41 on page 710 to find
additional information.
Table 48. IOP, IOA, and device address information for Models 830, SB2 System Unit with
FC 9074 Base I/O Tower
Position Possible Failing
Component
DSA (BBBBCcbb)
Note: IOA and
device DSA’s will not
follow the rules
below if the IOA is
manually reassigned
after IPL.
Unit Address
CB1 Service Processor 0001-70-00 FFFFFFFF
Figure 50. Locations for the Power Distribution Unit (PDU)
Locations and Addresses
750
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
