4. Refer to “Models 830/SB2 with FC 9074 – System Unit Backplane (MB1)” on
page 673 and “Models 830/SB2 with FC 9074 – Cards – Dedicated” on page 658
for the appropriate removal and installation procedure.
Table 74. Models 830/SB2 – Processor CCIN Table
System Model Processor Feature
Code
Processor CCIN Processor Location
830 (2–way) 23C1, 23C2, 23C3,
23C4, 23C5
245C M03
830 (4–way) 23D1, 23D2, 23D3,
23D4, 23D5, 23D6
245D M03
830 (8–way) 23D8, 23D9, 23DA,
23DB, 23DC, 23DD,
23DE
245D (You will need
aqty.of2)
M03, M04
SB2 (8–way) 2315 245D (You will need
aqty.of2)
M03, M04
Power Cord Part Numbers and Receptacle Descriptions
The part numbers, countries, and descriptions associated with each power cord can
be found at http://www.as400.ibm.com/tstudio/planning/index_rf.htm
This information is also in the Physical Planning PDF file on this service CD.
Type, Model, and Part Number list
Chapter 5. Locations, Addresses, and Part Listings 891
To Next Page
Loading...
Need help?
General