IBM i 830 User Manual

Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item
9320 Tape device Licensed Internal Code failure
Do the following:
1. Take a dump of the tape device Licensed Internal Code
(see the 3490 Tape Drive service information).
2. Power off the tape unit. Then power on the tape unit
to resume operation.
FI00851
9350 Tape unit detected a read or write error on tape medium
A permanent read or write error occurred, and the tape
unit determined that the tape cartridge is defective.
Exchange the tape cartridge.
MHKTMED
UHKCLN
FI00851
9351 I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O
processor data. For more information, see the iSeries Service
Functions information or ask your next level of support for
assistance.
FI00130
9355 The data format is incorrect; the tape cannot be read
The tape device does not give support to the data format
on the tape cartridge. Re-initialize the tape cartridge or use
a different tape cartridge.
MHKTMED
UHKCLN
FI00851
9500 I/O processor Licensed Internal Code error
If the system is operational, take a dump of the I/O
processor data. For more information, see the iSeries Service
Functions information or ask your next level of support for
assistance.
FI00130
96xx Tape unit failure
Use online problem analysis and the 3490 Tape Unit
service information to continue analyzing the problem.
9800 to 9803 I/O processor successfully recovered from temporary error
No action required. This reference code is logged for
information only.
9810 Problem analysis has determined a part should be
replaced.
This reference code is used for ending Online Problem
Analysis with a list of failing items. (Information Only)
9899 Problem analysis completed, the problem has been
corrected.
This reference code is used for ending Online Problem
Analysis when no problem was found or the problem was
corrected.
UHKFIXD
3490
138
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English