IBM i 830 User Manual

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
1308 Not valid condition in I/O Processor Licensed Internal Code
The Licensed Internal Code found a condition that should not have
occurred.
AJDGP01
AJDG301
FI00131
1309 I/O processor was not ready for interrupt that occurred AJDGP01
FI00131
FI00132
FI01117
1310 I/O processor resource not available
The I/O processor error log is being filled faster than the errors are being
reported to the system. Check other errors reported to the system and
correct them.
1311 System bus error FI00131
ANYBUS
AJDGP01
AJDG301
1312 A permanent I/O processor failure occurred FI00131
AJDGP01
1313 System bus error AJDG301
AJDGP01
FI00131
1316 I/O processor card or Licensed Internal Code error AJDGP01
FI00132
FI00131
1317 I/O processor card error
Display the Service Action Log entry for this SRC. If the Failing Item
indicates IOP, then replace the IOP. If the Failing Item indicates SVCDOCS,
then do NOT replace the IOP. This is a recoverable error. Perform the
following:
1. If the I/O Processor is not operable and disk units are attached, use
Hardware Service Manager to re-IPL the IOP. Other resources attached to
the IOP may then need to be Varied On.
2. If disk units are not attached, perform the VRYCFG RESET(*YES)
command to reset the IOP and Vary On attached resources.
SVCDOCS
1318 I/O processor card error FI00131
1403 Service processor Licensed Internal Code error
A resource needed to perform a requested function is not available in the
Licensed Internal Code.
AJDGP01
SVCPROC
1404 Service processor Licensed Internal Code error
The Licensed Internal Code has recovered from an unexpected condition.
AJDGP01
SVCPROC
1405 Service processor Licensed Internal Code error
A recoverable microcode condition occurred on the Service processor.
AJDGP01
SVCPROC
1406 Service processor Licensed Internal Code failed
A microprocessor exception occurred on the Service processor.
AJDGP01
SVCPROC
AJDG301
B006
192
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English