Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0149 WS IOP detected wrong request or response from device
Perform “WSAC-PIP1” on page 477.
FI00601
FI00730
0190 WS IOP detected no status change from device
Perform “WSAC-PIP1” on page 477.
FI00601
GXC7777
FI00730
0191 WS IOP detected busy time-out from device
Perform “WSAC-PIP1” on page 477.
FI00601
FI00730
0201 WS IOP detected error when transmitting data
Perform “WSAC-PIP1” on page 477.
FI00604
GXC7777
FI00631
FI00730
0203 WS IOP detected parity error from device
Perform “WSAC-PIP1” on page 477.
FI00604
GXC7777
FI00631
FI00730
0204 Device detected parity error from WS IOP
Perform “WSAC-PIP1” on page 477.
FI00604
GXC7777
FI00631
FI00730
0205 WS IOP detected error when transmitting data
Perform “WSAC-PIP1” on page 477.
FI00604
GXC7777
FI00631
FI00730
0206 WS IOP detected wrong data from device
Perform “WSAC-PIP1” on page 477.
FI00604
FI00631
FI00730
0207 WS IOP detected wrong address from device
Perform “WSAC-PIP1” on page 477.
FI00604
GXC7777
FI00730
0208 WS IOP detected device power turned off, and then on GXCEEEE
FI00604
0209 WS IOP detected wrong device response to start command FI00604
FI00730
0211 Printer detected equipment error FI00604
FI00730
0221 Device detected not valid value from WS IOP FI00604
FI00730
0224 Device detected wrong start command from WS IOP FI00604
FI00730
0225 WS IOP detected wrong exception response from device FI00604
FI00730
0290 WS IOP detected no status change from device FI00604
FI00730
0291 WS IOP detected busy time-out from device FI00604
FI00730
5000 Wrong command sent by Licensed Internal Code AJDG301
5001 Procedure error in Licensed Internal Code AJDG301
B075
204
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1
To Next Page
Loading...
