IBM i 830

Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
5115 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was an error reading the secondary partition’smain
storage dump from the secondary partition’s load-source into the Primary
partition’s main storage.
LPARSUP
5117 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. A main storage dump has occurred but cannot be written to
the load source device because a valid dump already exists.
Contact your next level of support.
LPARSUP
5121, 5135, 5145 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. There was an error writing the secondary partition’smain
storage dump to the secondary partition’s load-source.
LPARSUP
5148 Problem detected during main storage dump
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. An error occurred while doing a main storage dump that
would have caused another main storage dump.
Contact your next level of support.
LPARSUP
6012 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The secondary partition’s LID failed to completely load into the
the partition’s mainstore area.
Contact your next level of support.
LPARSUP
6015 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
The load-source media is corrupted or invalid. A SLIP install of the
secondary partition is required to recover.
MEDIA
FI00099
6025 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. The partition ID is characters 3 and 4 of the B2xx reference
code in word 1 of the SRC. Read and understand the information about
logical partitions. See the iSeries Service Functions information.
This is a problem with the load-source media being corrupt or invalid. A
SLIP install of the secondary partition is required to recover.
MEDIA
FI00099
6027 A problem occurred during the IPL of a secondary partition
The partition ID is characters 3 and 4 of the B2xx reference code in word 1
of the SRC. Read and understand the information about logical partitions.
See the iSeries Service Functions information.
A failure occurred when allocating memory for an internal object used for
LID load operations.
LPARCFG
B2xx
212
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1