IBM i 830

Reference
Code
Description/Action Perform all actions before exchanging
Failing Items
Failing Item Location
5001 DST received no response from a work station controller
The workstation I/O processor for the system or partition
console did not respond.
If the system uses an iSeries Operations Console, perform
“Operations Console-PIP1” on page 381.
Otherwise, perform “BUS PIP CNSL01” on page 287.
FI00380
AJDG301
5002 DST problem attempting to use the system console
A code problem occurred during an attempt to use the system
console.
Perform “LIC-PIP3” on page 344.
AJDG301
FI00380
5003 Service program failed
The ASCII system console failed to respond.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
5004 DST console failed to respond
The system console failed to respond.
If the system uses an iSeries Operations Console, perform
“Operations Console-PIP1” on page 381.
Otherwise, perform “TWSC-PIP1” on page 465.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
5005 Service program failed
The workstation adapter system console failed to respond.
Perform “WSAC-PIP1” on page 477.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
5007 Service program failed
The workstation adapter console failed to respond.
If the system uses an iSeries Operations Console, perform
“Operations Console-PIP1” on page 381.
Otherwise, perform “WSAC-PIP1” on page 477.
FI00320
FI00602
UG3USR1
AJDG301
FI00380
5008 DST console failed to respond
Perform Operations Console-PIP3.
FI00719
5010 IPL service function ended abnormally
Perform “LIC-PIP4” on page 345.
AJDG301
5082 DST lost contact with the console
A service program lost contact with the system console.
Do you have a twinaxial terminal for the console?
No Yes
↓ Perform “TWSC-PIP1” on page 465.
Perform “WSAC-PIP1” on page 477.
AJDG301
UG3USR1
B6xx (including A6xx)
248
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1