IBM i 830 User Manual

8. Power off the system or partition.
9. Install all of the IOAs that you removed in step 6 on page 312 of this
procedure. Be sure to install them in their original positions.
10. Power on the system or partition.
Does the SRC or failure that sent you to this procedure occur?
Yes No
↓ Perform “BUS PIP VERIFY - RA” on page 323.
This ends the procedure.
11. Power off the system or partition.
12. Remove all of the IOAs that you marked with an ″X″ in “Appendix H.
Installed Features in a PCI Bridge Set Form” on page 969. Be sure to record
the card position of each IOA so that you can reinstall it in the same position
later.
13. Remove the IOP that you exchanged and install the original IOP in it’s
original position.
14. Reinstall, in its original position, one of the IOA adapters that you removed.
15. Power on the system or partition.
Does the SRC or failure that sent you to this procedure occur?
Yes No
↓ Power off the system or partition. Repeat step 14 for another one of
the I/O adapter cards that you removed.
If you have reconnected all of the I/O adapters and the SRC or failure
that sent you to this procedure does not occur, the problem is
intermittent.
This ends the procedure.
16. The I/O adapter card that you just installed is the failing FRU.
17. Power off the system or partition.
18. Exchange the I/O adapter card that you last installed. Be sure to install the
new I/O adapter card in the same position.
19. Power on the system or partition.
Does the SRC or failure that sent you to this procedure occur?
No Yes
↓ Call your next level of support.
This ends the procedure.
20. Power off the system or partition.
21. Reinstall, in their original positions, the remaining I/O adapter cards that you
removed.
Does the SRC or failure that sent you to this procedure occur?
No Yes
↓ Call your next level of support.
This ends the procedure.
22. Does a different SRC occur?
Yes No
↓ Perform “BUS PIP VERIFY - RA” on page 323.
Bus, High-Speed Link (HSL) PIPs
Chapter 3. Problem Isolation Procedures (PIPs), Failing Items, and Symbolic FRU Isolation 313

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English