IBM i 830 User Manual

Table 48. IOP, IOA, and device address information for Models 830, SB2 System Unit with
FC 9074 Base I/O Tower (continued)
Position Possible Failing
Component
DSA (BBBBCcbb)
Note: IOA and
device DSA’s will not
follow the rules
below if the IOA is
manually reassigned
after IPL.
Unit Address
D11 Disk Unit The disk unit has the
same DSA as the IOA
attached to the
internal cable
labelled ″L-1″.
x10300FF (where x is
the same as the first
character of the
xFFFFFFF IOA Unit
Address)
D12 Disk Unit x10400FF (where x is
the same as the first
character of the
xFFFFFFF IOA Unit
Address)
D13 Disk Unit x10500FF (where x is
the same as the first
character of the
xFFFFFFF IOA Unit
Address)
D14 Disk Unit x10600FF (where x is
the same as the first
character of the
xFFFFFFF IOA Unit
Address)
D15 Disk Unit x10700FF (where x is
the same as the first
character of the
xFFFFFFF IOA Unit
Address)
Locations and Addresses
754
iSeries Model 830, 840, SB2, and SB3 Problem Analysis, Repair and Parts V5R1

IBM i 830 Specifications

General

Brand	IBM
Model	i 830
Category	Server
Language	English