Reference Code Description/Action Perform all actions before exchanging Failing Items Failing Item
0510 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K9, and
the bus was released.
You must reinitialize the operation to continue.
0511 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K10,
and the bus was released.
You must reinitialize the operation to continue.
0512 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K11, and
the bus was released.
You must reinitialize the operation to continue.
0513 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K12,
and the bus was released.
You must reinitialize the operation to continue.
0514 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K13,
and the bus was released.
You must reinitialize the operation to continue.
0515 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of disk unit K14,
and the bus was released.
You must reinitialize the operation to continue.
0516 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 1, and the
bus was released.
You must reinitialize the operation to continue.
0517 Timeout, no action detected. Reinitialize the operation
No action was detected for the installation or removal of device 2, and the
bus was released.
You must reinitialize the operation to continue.
0518 Timeout, no action detected. Reinitialize the operation.
No action was detected for the installation or removal of disk unit 9, and
the bus was released.
You must reinitialize the operation to continue.
1xxx
Chapter 2. Unit Reference Codes 77
To Next Page
Loading...
