EasyManuals Logo

Interlogix IFS NS3502-8P-2S User Manual

Interlogix IFS NS3502-8P-2S
568 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #220 background imageLoading...
Page #220 background image
IFS NS3502-8P-2S User Manual
220
length (PLN) settings.
0: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
and the (PLN) is equal to IPv4 (0x04).
1: ARP/RARP frames where the HLN is equal to Ethernet (0x06)
and the (PLN) is equal to IPv4 (0x04).
Any: Any value is allowed ("don't-care").
IP
Specify whether frames can hit the action according to their
ARP/RARP hardware address space (HRD) settings.
0: ARP/RARP frames where the HLD is equal to Ethernet (1).
1: ARP/RARP frames where the HLD is equal to Ethernet (1).
Any
: Any value is allowed ("don't-care").
Ethernet
Specify whether frames can hit the action according to their
ARP/RARP protocol address space (PRO) settings.
0: ARP/RARP frames where the PRO is equal to IP (0x800).
1: ARP/RARP frames where the PRO is equal to IP (0x800).
Any: Any value is allowed ("don't-care").
IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object Description
IP Protocol Filter
Specify the IP protocol filter for this ACE.
Any: No IP protocol filter is specified ("don't-care").
Specific
: If you want to filter a specific IP protocol filter with this
ACE, choose this value. A field for entering an IP protocol filter
appears.
ICMP: Select ICMP to filter IPv4 ICMP protocol frames. Extra
fields for defining ICMP parameters will appear. These fields are
explained later in this help file.
UDP: Select UDP to filter IPv4 UDP protocol frames. Extra fields
for defining UDP parameters will appear. These fields are
explained later in this help file.
TCP: Select TCP to filter IPv4 TCP protocol frames. Extra fields
for defining TCP parameters will appear. These fields are
explained later in this help file.
IP Protocol Value
When "Specific" is selected for the IP protocol value, you can
enter a specific value. The allowed range is 0 to 255. A frame
that hits this ACE matches this IP protocol value.
IP TTL
Specify the Time-to-Live settings for this ACE.
Zero: IPv4 frames with a Time-to-Live field greater than zero
must not be able to match this entry.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Interlogix IFS NS3502-8P-2S and is the answer not in the manual?

Interlogix IFS NS3502-8P-2S Specifications

General IconGeneral
BrandInterlogix
ModelIFS NS3502-8P-2S
CategorySwitch
LanguageEnglish

Related product manuals