Section 7: Command reference Model 2651A High Power System SourceMeter® Instrument Reference Manual
7-240 2651A-901-01 Rev. A / March 2011
smuX.trigger.PULSE_COMPLETE_EVENT_ID
This constant contains the pulse complete event number.
Type TSP-Link accessible Affected by Where saved Default value
Constant Yes
Usage
eventID = smuX.trigger.PULSE_COMPLETE_EVENT_ID
eventID
The pulse complete event number
X
SMU channel (for example, smua.trigger.PULSE_COMPLETE_EVENT_ID
applies to SMU channel A)
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to pulse complete
events from this SMU.
Also see
Triggering (on page 3-32)
To Next Page
Need help?
General
