Keithley 2651A

Section 5: Remote commands Model 2651A High Power System SourceMeter® Instrument Reference Manual
5-6 2651A-901-01 Rev. A / March 2011
Display
display.clear() (on page 7-54)
display.getannunciators()
(on page 7-54)
display.getcursor()
(on page 7-56)
display.getlastkey()
(on page 7-56)
display.gettext()
(on page 7-58)
display.inputvalue()
(on page 7-59)
display.loadmenu.add()
(on page 7-61)
display.loadmenu.catalog()
(on page 7-62)
display.loadmenu.delete()
(on page 7-63)
display.locallockout
(on page 7-64)
display.menu()
(on page 7-64)
display.prompt()
(on page 7-66)
display.screen
(on page 7-67)
display.sendkey()
(on page 7-68)
display.setcursor()
(on page 7-69)
display.settext()
(on page 7-70)
display.trigger.EVENT_ID
(on page 7-72)
display.waitkey()
(on page 7-74)
Error queue
When errors occur, the error messages are placed in the error queue. Use error queue commands to
request error message information.
errorqueue.clear()
(on page 7-76)
errorqueue.count
(on page 7-76)
errorqueue.next()
(on page 7-77)
Event log
You can use the event log to view specific details about LAN triggering events.
eventlog.all()
(on page 7-78)
eventlog.clear()
(on page 7-78)
eventlog.count
(on page 7-79)
eventlog.enable
(on page 7-80)
eventlog.next()
(on page 7-80)
eventlog.overwritemethod
(on page 7-81)