EasyManuals Logo

Keithley 2651A Reference Manual

Keithley 2651A
800 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #415 background imageLoading...
Page #415 background image
Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 7: Command reference
2651A-901-01 Rev. A / March 2011 7-107
lan.config.dns.hostname
This attribute defines the dynamic DNS host name.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes LAN restore defaults Nonvolatile memory Instrument-specific
(see Details)
Usage
hostName = lan.config.dns.hostname
lan.config.dns.hostname = hostName
hostName
The host name to use for dynamic DNS registration; the host name must:
• be a string of 255 characters or less
• start with a letter
• end with a letter or digit
• contain only letters, digits, and hyphens
Details
This attribute holds the host name to request during dynamic DNS registration. Dynamic DNS registration works
with DHCP to register the host name specified in this attribute with the DNS server.
The format for hostName is "k-<model number>-<serial number>", where <model number> and
<serial number> are replaced with the actual model number and serial number of the instrument (for
example, "k-707B-1234567"). Note that hyphens separate the characters of hostName.
The length of the fully qualified host name (combined length of the domain and host name with separator
characters) must be less than or equal to 255 characters. Although up to 255 characters can be entered here,
care must be taken to be sure the combined length is also no more than 255 characters.
Example
print(lan.config.dns.hostname)
Outputs the present dynamic DNS host name.
Also see
lan.config.dns.dynamic (on page 7-106)
lan.restoredefaults()
(on page 7-114)
lan.config.dns.verify
This attribute defines the DNS host name verification state.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (RW) Yes LAN restore defaults Nonvolatile memory lan.ENABLE
Usage
state = lan.config.dns.verify
lan.config.dns.verify = state
state
DNS hostname verification state:
1 or lan.ENABLE: DNS host name verification enabled
0 or lan.DISABLE: DNS host name verification disabled

Table of Contents

Other manuals for Keithley 2651A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keithley 2651A and is the answer not in the manual?

Keithley 2651A Specifications

General IconGeneral
BrandKeithley
Model2651A
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals