To Next Page

To Previous Page

Section 7: Command reference Model 2651A High Power System SourceMeter® Instrument Reference Manual

7-142 2651A-901-01 Rev. A / March 2011

node[N].execute()

This function starts test scripts from a remote node.

Type TSP-Link accessible

Affected by Where saved Default value

Function Yes (see Details)

Usage

node[N].execute(scriptCode)

The node number of this instrument

scriptCode

A string containing the source code

Details

Only the remote master node can use the execute command to run a script on this node. This function does not

run test scripts on the master node, only on this node when initiated by the master node.

This function may only be called when the group number of the node is different than the node of the master.

This function will not wait for the script to finish execution.

This function cannot be used from the local node. This command should only be used from a remote master

when controlling this instrument over a TSP-link

Example 1

node[2].execute(sourcecode)

Runs script code on node 2.

Example 2

node[3].execute("x = 5")

Runs script code in string constant ("x = 5") to set x

equal to 5 on node 3.

Example 3

node[32].execute(TestDut.source)

Runs the test script stored in the variable TestDut

(previously stored on the master node) on node 32.

Also see

tsplink.group (on page 7-347)

TSP advanced features

(on page 6-53)

node[N].getglobal()

This function returns the value of a global variable.

Type TSP-Link accessible

Affected by Where saved Default value

Function Yes (see Details)

Keithley 2651A Reference Manual

Other manuals for Keithley 2651A