Keithley 2651A Reference Manual

Section 5: Remote commands Model 2651A High Power System SourceMeter® Instrument Reference Manual
5-10 2651A-901-01 Rev. A / March 2011
lan.trigger[N].mode (on page 7-127)
lan.trigger[N].overrun
(on page 7-128)
lan.trigger[N].protocol
(on page 7-129)
lan.trigger[N].pseudostate
(on page 7-129)
lan.trigger[N].stimulus
(on page 7-130)
lan.trigger[N].wait()
(on page 7-131)
localnode.description
(on page 7-133)
localnode.password
(on page 7-134)
localnode.passwordmode
(on page 7-135)
Miscellaneous
delay() (on page 7-42)
exit()
(on page 7-82)
localnode.autolinefreq
(on page 7-132)
localnode.linefreq
(on page 7-133)
localnode.password
(on page 7-134)
localnode.passwordmode
(on page 7-135)
makegetter()
(on page 7-140)
makesetter()
(on page 7-140)
meminfo()
(on page 7-141)
waitcomplete()
(on page 7-374)
opc()
(on page 7-144)
Parallel script execution
dataqueue.add() (on page 7-38)
dataqueue.CAPACITY
(on page 7-39)
dataqueue.clear()
(on page 7-39)
dataqueue.count
(on page 7-40)
dataqueue.next()
(on page 7-41)
node[N].execute()
(on page 7-142)
node[N].getglobal()
(on page 7-142)
node[N].setglobal()
(on page 7-143)
tsplink.group
(on page 7-347)
tsplink.master
(on page 7-347)
tsplink.node
(on page 7-347)
Queries and response messages
The print(), printbuffer(), and printnumber() functions are used to query the instrument
and generate response messages. The format attributes control how the data is formatted when
those functions are used.
format.asciiprecision
(on page 7-86)
format.byteorder
(on page 7-87)
format.data
(on page 7-87)
localnode.prompts
(on page 7-136)
localnode.prompts4882
(on page 7-137)
localnode.showerrors
(on page 7-139)
print()
(on page 7-144)
printbuffer()
(on page 7-145)
printnumber()
(on page 7-146)

Keithley 2651A Specifications

General

Brand	Keithley
Model	2651A
Category	Measuring Instruments
Language	English