Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 7: Command reference
2651A-901-01 Rev. A / March 2011 7-153
Example 1
savebuffer(smua.nvbuffer1, "csv",
"mybuffer.csv")
Save smua nonvolatile reading buffer 1 as a
.CSV file named mybuffer.csv.
Example 2
savebuffer(smua.nvbuffer1, "csv",
"/usb1/mybuffer.csv")
Save smua nonvolatile reading buffer 1 to an
installed USB flash drive as a .CSV file
named mybuffer.csv.
Also see
smuX.savebuffer() (on page 7-209)
script.anonymous
This is a reference to the anonymous script.
Type TSP-Link accessible Affected by Where saved Default value
Attribute (R) No See Details See Details Not applicable
Usage
scriptVar = script.anonymous
scriptVar
The name of the variable that references the script
Details
You can use the script.anonymous script like any other script. Also, you can save the anonymous script as a
user script by giving it a name.
This script is replaced by loading a script with the loadscript or loadandrunscript commands when they
are used without a name.
Example 1
script.anonymous.list()
Displays the content of the anonymous
script.
Example 2
print(script.anonymous.source)
Retrieves the source of the anonymous
script.
To Next Page
Loading...
Need help?
General
