To Next Page

To Previous Page

Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 7: Command reference

2651A-901-01 Rev. A / March 2011 7-103

Also see

io.open() (on page 7-100)

io.write()

This function writes data to the default output file.

Type TSP-Link accessible Affected by Where saved Default value

Function Yes

Usage

io.write()

io.write(data1)

io.write(data1, data2)

io.write(data1, ..., dataN)

data1

The data to be written

data2

The data to be written

dataN

The data to be written

...

One or more values separated by commas

Details

All data parameters must be either strings or numbers.

NOTE

Data is not immediately written to a file when you use the io.write() function. The io.write()

function buffers data; it may not be written to the USB drive immediately. Use the io.flush()

function to immediately write buffered data to the drive.

Also see

io.flush() (on page 7-99)

lan.applysettings()

This function re-initializes the LAN interface with new settings.

Type TSP-Link accessible

Affected by Where saved Default value

Function Yes

Usage

lan.applysettings()

Keithley 2651A Reference Manual

Other manuals for Keithley 2651A