Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 5: Remote commands
2651A-901-01 Rev. A / March 2011 5-11
Reading buffer
bufferVar.appendmode (on page 7-16)
bufferVar.basetimestamp
(on page 7-17)
bufferVar.cachemode
(on page 7-18)
bufferVar.capacity
(on page 7-18)
bufferVar.clear()
(on page 7-19)
bufferVar.clearcache()
(on page 7-20)
bufferVar.collectsourcevalues
(on page 7-21)
bufferVar.collecttimestamps
(on page 7-21)
bufferVar.fillcount
(on page 7-22)
bufferVar.fillmode
(on page 7-23)
bufferVar.n
(on page 7-24)
bufferVar.timestampresolution
(on page 7-24)
savebuffer()
(on page 7-152)
smuX.buffer.getstats()
(on page 7-172)
smuX.buffer.recalculatestats()
(on page 7-173)
smuX.makebuffer()
(on page 7-189)
smuX.nvbufferY
(on page 7-208)
smuX.savebuffer()
(on page 7-209)
Reset
Resets settings to their default settings.
digio.trigger[N].reset()
(on page 7-49)
localnode.reset()
(on page 7-137)
reset()
(on page 7-151)
timer.reset()
(on page 7-333)
smuX.reset()
(on page 7-209)
tsplink.reset()
(on page 7-349)
trigger.blender[N].reset()
(on page 7-335)
trigger.timer[N].reset()
(on page 7-343)
tsplink.trigger[N].reset()
(on page 7-356)
RS-232
serial.baud (on page 7-163)
serial.databits
(on page 7-164)
serial.flowcontrol
(on page 7-164)
serial.parity
(on page 7-165)
serial.read()
(on page 7-166)
serial.write()
(on page 7-167)
Saved setups
Use the saved setups commands to manipulate the instrument's configurations. You can restore (or
save) configurations from the instrument's nonvolatile memory or an installed USB flash drive.
Also, you can use the setup.poweron attribute to specify which setup stored in the instrument's
nonvolatile memory will be recalled when the unit is turned on.
setup.poweron
(on page 7-169)
setup.recall()
(on page 7-170)
setup.save()
(on page 7-171)

Keithley 2651A Specifications

General

Brand	Keithley
Model	2651A
Category	Measuring Instruments
Language	English