To Next Page

To Previous Page

Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 7: Command reference

2651A-901-01 Rev. A / March 2011 7-123

Example

lan.trigger[5].assert()

Creates a trigger with LAN packet 5.

Also see

lan.trigger[N].clear() (on page 7-123)

lan.trigger[N].mode

(on page 7-127)

lan.trigger[N].overrun

(on page 7-128)

lan.trigger[N].stimulus

(on page 7-130)

lan.trigger[N].wait()

(on page 7-131)

lan.trigger[N].clear()

This function clears the event detector for a trigger.

Type TSP-Link accessible

Affected by Where saved Default value

Function Yes

Usage

lan.trigger[N].clear()

The LAN event number to clear (1 to 8)

Details

A trigger’s event detector remembers if an event has been detected since the last call. This function clears a

trigger’s event detector and discards the previous history of the trigger packet.

This function clears all overruns associated with this LAN trigger.

Example

lan.trigger[5].clear()

Clears the event detector with LAN packet 5.