To Next Page

To Previous Page

Section 7: Command reference Model 2651A High Power System SourceMeter® Instrument Reference Manual

7-124 2651A-901-01 Rev. A / March 2011

lan.trigger[N].connect()

This function prepares the event generator for outgoing trigger events.

Type TSP-Link accessible

Affected by Where saved Default value

Function Yes

Usage

lan.trigger[N].connect()

The LAN event number (1 to 8)

Details

Prepares the event generator to send event messages. For TCP connections, this opens the TCP connection.

The event generator automatically disconnects when either the lan.trigger[N].protocol or

lan.trigger[N].ipaddress attributes for this event are changed.

Example

lan.trigger[1].protocol = lan.MULTICAST

lan.trigger[1].connect()

lan.trigger[1].assert()

Set the protocol for LAN trigger 1 to be

multicast when sending LAN triggers.

Then, after connecting the LAN trigger,

send a message on LAN trigger 1 by

asserting it.

Also see

lan.trigger[N].assert() (on page 7-122)

lan.trigger[N].ipaddress

(on page 7-126)

lan.trigger[N].overrun

(on page 7-128)

lan.trigger[N].protocol

(on page 7-129)

lan.trigger[N].stimulus

(on page 7-130)

lan.trigger[N].wait()

(on page 7-131)

lan.trigger[N].connected

This attribute stores the LAN event connection state.

Type TSP-Link accessible Affected by Where saved Default value

Attribute (R) Yes Not applicable Not applicable Not applicable

Keithley 2651A Reference Manual

Other manuals for Keithley 2651A