Keithley 2651A Reference Manual

Model 2651A High Power System SourceMeter® Instrument Reference Manual Section 7: Command reference
2651A-901-01 Rev. A / March 2011 7-249
smuX.trigger.SWEEP_COMPLETE_EVENT_ID
This constant contains the sweep complete event number.
Type TSP-Link accessible Affected by Where saved Default value
Constant Yes
Usage
eventID = smuX.trigger.SWEEP_COMPLETE_EVENT_ID
eventID
The sweep complete event number
X
Source-measure unit (SMU) channel (for example,
smua.trigger.SWEEP_COMPLETE_EVENT_ID applies to SMU channel A)
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to sweep complete
events from this SMU.
Also see
Triggering (on page 3-32)
smuX.trigger.SWEEPING_EVENT_ID
This constant contains the sweeping event number.
Type TSP-Link accessible Affected by Where saved Default value
Constant Yes
Usage
eventID = smuX.trigger.SWEEPING_EVENT_ID
eventID
The sweeping event number
X
Source-measure unit (SMU) channel (for example,
smua.trigger.SWEEPING_EVENT_ID applies to SMU channel A)
Details
Set the stimulus of any trigger event detector to the value of this constant to have it respond to sweeping events
from this SMU.
Also see
Triggering (on page 3-32)

Keithley 2651A Specifications

General

Brand	Keithley
Model	2651A
Category	Measuring Instruments
Language	English