86
Style Play operating mode
Mixer/Tuning: Tuning
Mixer/Tuning: Tuning
This page is where you can set the octave transpose and fine tun-
ing for each track. Plus, you can program the Pitch Bend range
for each track.
Use the TRK. SEL. button to switch from the Keyboard to the
Style tracks, and vice-versa.
PB Sensitivity
These parameters show the Pitch Bend range for each track, in
semitones.
1…12 Maximum up/down pitch bend range (in semi-
tones). 12 = ±1 octave.
0 No pitch bend allowed.
Octave Transpose
This is the octave transpose value.
-3 Lowest octave.
0 Standard tuning.
+3 Highest octave.
Detune
This is the fine tuning value.
-64 Lowest pitch.
00 Standard tuning.
+63 Highest pitch.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: Sub Scale
This page lets you program an alternative scale for the tracks
selected with the “Scale Mode” parameter (see page 95).
The
remaining tracks (if any) use the basic scale set in Global
mode (see “Main Scale” on page 231).
Note: A different Scale can be associated to each Performance or
STS.
Note: Quarter Tone selection can be received by MIDI (i.e., by an
external sequencer or controller). Conversely, selection of Quarter
Tone settings can be sent by the Pa1X to an external MIDI recorder
as System Exclusive data.
Scale
Selected scale. See “Scales” on page 382 for a list of the available
scales. When selecting the User scale, the keyboard diagram on
the right becomes active (see “How to fine tune each note of the
User scale” below).
Key
This parameter is needed by some scales to set the preferred
key (see “Scales” on page 382).
Quarter Tone
Check the Quarter Tone parameter to make the keyboard dia-
gram active. in the display, touch any note you want to lower a
quarter tone, making a big dot appear on the note diagram.
Touch the note again to make the dot disappear.
This control is momentary and not saved to memory, to allow
for fast scale alteration while playing. You can assign the Quarter
Tone function also to a footswitch, an EC5 switch or an Assign-
able Switch.
See below “How to use the Quarter Tone function with a foot-
switch, EC5 switch or Assignable Switch” for information on the
use of this function.
Keyboard diagram
When Quarter Tone is checked, or a User scale is selected, this
diagram allows you to modify each note’s pitch.
Sty
Sty
Sty
Sty
To Next Page
Loading...
Need help?
General
