55
Song Play
Listening to a CD
Quick Guide
Listening to a CD
If your Pa1X is fitted with the (optional) CDRW-1 CD Player, you can listen to songs from any Audio
CD. Please note that, while you can assign a single CD track to either sequencers, you can mix it with
a midifile assigned to the other sequencer.
1 Insert the CD into the CD Player.
2 Press a Sequencer area to open the Song Select window.
3 Use the Device pop-up menu to select the CD Player.
4 Select any of the tracks contained in the CD, and press Select to assign it
to the selected Sequencer.
5 Use the Sequencer’s transport controls to play/stop the selected CD track.
You can jump to the following CD track by keeping the SHIFT button pressed, while pressing
the >> button. Keep SHIFT pressed and press << to jump to the previous CD track.
Device pop-
up menu
Check the All
option to listen to
all the tracks on
the CD, starting
from the selected
one. Press
(PLAY/STOP) to
start listening.
To Next Page
Loading...
