67
Singing with a connected microphone
Soloing your voice (TalkBack)
Quick Guide
Soloing your voice (TalkBack)
Sometimes, during a live show, you might like to talk to your audience. Use the TalkBack function to
attenuate the music, and let your voice pass through clean and clear.
1 While in the main page of the Style Play or Song Play mode, press the
Mic tab to see Voice Processor’s “master” switches.
2 During playback, press the Talk checkbox, making the check mark
appear.
Note: By default, you
can turn the TalkBack
function on/off by press-
ing the ASSIGNABLE
SWITCH 4, whichever the
shown page is.
3 Sing or talk into the microphone.
You’ll hear background music has been made softer, while your voice will be heard loud and
proud.
4 To turn the TalkBack function off, press the Talk checkbox again, making
the check mark disappear.
The background music returns to the original volume.
Locking Voice Processor settings
If you like the selected Voice Processor Preset, and other settings you have made in the Microphone
panel, you can “lock” them, to prevent them from changing each time you select a Performance, Style
or STS that may be saved using different settings.
1 While the Microphone panel is shown in the display, press the lock icon
to freeze it.
2 To unlock the settings, press the lock icon again.
i
Lock on. Voice Pro-
cessor settings will
not change when
selecting a different
Performance or STS.
Lock off. Voice Pro-
cessor settings will
change when select-
ing a new Perfor-
mance or STS.
To Next Page
Loading...
Need help?
General
