104
Style Record mode
Exit by saving or deleting changes
Exit by saving or deleting changes
When finished editing, you can save your Style in memory, or
abort any change.
• To save changes, select the “Write Style” command from the
page menu (see “Write Style dialog box” on page 123).
• To abort all changes, select the “Exit from Record” command
from the page menu, or press the REC button, to exit from
record and return to the main page of the Style Record mode.
Hint: Save often while recording, to avoid accidentally losing your
Style.
Listening to the Style while in Edit mode
While you are in Style Record mode, you can listen to the
selected Chord Variation or to the whole Style, depending on
the page you are in.
To select a Chord Variation, go to the Main page of the Record/
Edit mode (see “Element (Style Element)” and “Chord Var
(Chord Variation)” on page 105).
• When you are in the Main, Event Edit, Quantize, Trans-
pose, Velocity, or Delete pages, you can listen to the
selected Chord Variation. Press START/STOP to check
how it works. Press START/STOP again to stop the play-
back.
• When you are in the Sounds/Expression, Keyboard
Range, Chord Table, Trigger/Tension, Delete All, Copy,
Style Element Controls or Style Control pages, you can
listen to the whole Style. Press START/STOP and play
some chords to do your tests. Select any Style Element
using the control panel buttons (VARIATION 1-4,
INTRO 1-2, FILL 1-2, ENDING 1-2). Press START/STOP
again to stop the playback.
Note: While in Style mode, the Fingered 3 Chord Scanning
mode is automatically selected.
List of recorded events
The Style Record mode filters out some events that may cause
wrong operation of the Style. Here are the recorded events, and
the most important filtered-out events.
Note: Some Control Change messages cannot be recorded directly
by using Pa1X integrated controls.
All allowed controllers can be assigned to an Assignable Pedal/
Slider/Switch.
MIDI Control Change messaged inserted by using a software on an
external computer are imported when using the Style to Midi
application, available from www
.korgpa.com.
Some controllers are reset at the end of the pattern.
Control function CC# (Control Change Number)
Allowed
Note On
Note Off
(a)
(a). A Note Off will always be inserted at the end of the Chord Varia-
tion.
Pitch Bend
Modulation 1 1
Modulation 2 2
Pan 10
Expression 11
CC#12 12
CC#13 13
Damper 64
Filter Resonance 71
Low Pass Filter Cutoff 74
CC#80 80
CC#81 81
CC#82 82
Not allowed
Program Change
After Touch
Volume 7
All other Control Change messages
To Next Page
Loading...
Need help?
General
