127
Pad Record mode
Exit by saving or deleting changes
Reference
Exit by saving or deleting changes
When finished editing, you can save your Pad in memory, or
cancel any change.
• To save changes, select the “Write Pad” command from the
page menu (see “Write Pad dialog box” on page 136).
• To cancel all changes, select the “Exit from Record” command
from the page menu, or press the REC button, to exit from
record and return to the main page of the Style Record mode.
Hint: Save often while recording, to avoid accidentally losing your
Pad.
Listening to the Pad while in Record/Edit
mode
While you are in Pad Record or Pad Edit mode, you can listen to
the selected Chord Variation. To select a Chord Variation, go to
the Main page of the Record/Edit mode.
• When you are in the Main, Event Edit, Quantize, Trans-
pose, Velocity, or Delete pages, you can listen to the selected
Chord Variation. Press START/STOP to check how it
works. Press START/STOP again to stop the playback.
• When you are in the Sounds/Expression, Keyboard Range,
Chord Table, Trigger/Tension, Delete All, Copy, Style Ele-
ment Controls or Style Control pages, you can listen to the
whole Pad. Press START/STOP and play some chords to do
your tests.
Note: In this mode, the pattern is always played back in loop, even
if the “Pad Type” parameter is set to “One Shot” (see page 133).
Note: While in Pad Record mode, the Fingered 3 Chord Scanning
mode is automatically selected.
Main page - Pad Record
The Main page of the Pad Record mode looks like a simplified
version of the Main page of the Style Record mode, with just a
single track to be recorded and no Style Elements to be chosen.
The only addition is the “Pad Sync” parameter.
Please look at the User’s Manual for more information on the
various parameters. Only general information and differences
with the Style Record mode are described here.
Recording parameters area
Chord Var (Chord Variation)
This parameter lets you select one of the six available Chord
Variations (CV1 … CV6) for editing or recording.
Note: When this parameter and the assigned value is in small let-
ters (cv1…cv6), the Chord Variation is empty; when it is in capitals
(CV1…CV6), it is already recorded.
Resolution
Use this parameter to set the quantization during record-
ing.
Pad Sync
This parameter allows you to set a synchronization mode for the
Pad’s pattern.
Off No synchronization. The sequence will start as
soon as you press the PAD button.
Continued The pattern will start immediately, in sync with
the arranger’s or active sequencer’s tempo.
Depending on the current position of the beat
counter, it might not start from its very begin-
ning; instead, it will continue from the current
position.
For example, if the arranger’s or sequencer’s beat
counter shows the third beat, and is playing tick
91, the Pad will start from its third beat, at tick
91.
This works exactly as if it was a Fill.
PAD
To Next Page
Loading...
Need help?
General
