50
Song Play
Playing back a Song
Playing back a Song
Once a Song has been selected, it may be played back by the sequencer.
1 Be sure the BALANCE slider is completely moved to the left (toward
Sequencer 1).
2 Press the (PLAY/STOP) button in the SEQUENCER 1 section to start
playback.
3 Use the SEQUENCER 1 control section to control the Song’s playback.
4 When you want to stop the song and go back to the first measure, press
the (PLAY/STOP) button again.
Note: In any case, the
sequencer will automati-
cally stop when the end
of the Song is reached.
After pressing the (PLAY/STOP) button,
the button’s LED turns on, and the measure
counter begins to show the current measure
number.
Press the REWIND button once to go to the
beginning of the current measure. Keep it
pressed to go back several measures.
Press the FAST FORWARD button once to go
to the beginning of the next measure. Keep it
pressed to go forward several measures.
Press the PAUSE button to stop the Song at
the current position. Press it again (or press
PLAY/STOP) to resume playback.
i
When the Song is
stopped, the LED on the
PLAY/STOP button goes
dark.
To Next Page
Loading...
Need help?
General
