49
Song Play
Selecting a Song to play
Quick Guide
2 Press the Sequencer 1 area to open the Song Select window (or press the
SELECT button of the Sequencer 1 section on the control panel).
Hint: As an alterna-
tive, you can open the
Song Select window by
pressing the SELECT but-
ton in the SEQUENCER 1
section on the control
panel.
3 Scroll through the list and select the Song to play.
4 When the Song is selected, press the Select button to confirm your selec-
tion, and close the Song Select window.
i
The selected Song is highlighted.
Press a Song’s name to select it.
Use the scroll bar to see all Songs
in the list. As an alternative,
select an item and use the DIAL.
Use the Open and Close buttons
to browse through the folders.
Use the Device pop-up menu to select
one of the available mass-storage
devices (floppy disk, hard drive…).
Use the Sync P. (Synchronized Path)
button to see the selected Song again.
Press the Select button to select the
highlighted Song, and assign it to
Sequencer 1.
After pressing the Select button in the display,
the main page of the Song Play mode appears
again.
Selected Song
To Next Page
Loading...
Need help?
General
