133
Pad Record mode
Pad Edit: Copy from Pad
Reference
Note: If you copy too many events on the same “tick”, the “Too
many events!” message appears, and the copy operation is aborted.
Note: When you copy over an existing Chord Variation, Program
Change data is not copied, to leave the original Sounds unchanged
for that Chord Variation.
From Style
Choose this option to select the source Style to copy the track
from. Press the Select button to open the Style Select window
and select the source Style.
From E/CV (Style Element/Chord Variation)
Use this parameter to select the source Style Element and Chord
Variation.
Var1…End2 A single Style Element, i.e., all Chord Variations.
V1-CV1…E2-CV2
A single Chord Variation.
From Track
Use this parameter to select the source track to copy.
Drum-Acc5 Single track of the selected Style Element or
Chord Variation.
To CV (Chord Variation)
Use this parameter to select a target Chord Variation inside the
current Pad.
CV1…CV6 Target Chord Variation.
Execute
Press this button to execute the operation set in this page.
Pad Edit: Copy from Pad
Here you can copy a Chord Variation from a different Pad. Fur-
thermore, you can copy a whole Pad.
Warning: The Copy operation deletes all data at the target location
(overwrite).
After setting the various parameters, press Execute.
Note: If you copy too many events on the same “tick”, the “Too
many events!” message appears, and the copy operation is aborted.
Note: When you copy over an existing Chord Variation, Program
Change data is not copied, to leave the original Sounds unchanged
for that Chord Variation.
From Pad
Choose this option to select the source Pad to copy the Chord
Variation from. Press the Select button to open the Pad Select
window and select the source Pad.
From CV (Chord Variation)
Use this parameter to select the source Chord Variation.
All All Chord Variations, i.e. the whole Pad. You can’t
change the target, that is automatically set to All.
CV1…CV6 Single Chord Variation.
To CV (Chord Variation)
Use this parameter to select a target Chord Variation inside the
current Pad.
CV1…CV6 Target Chord Variation. Automatically set to All it
the “From CV” parameter is also set to All.
Execute
Press this button to execute the operation set in this page.
Pad Track Controls: Sound/Expression
In this page you can assign a Sound to the Pad track, adjust its
Volume (CC#07) and Expression (CC#11) values, and set vari-
ous other parameters, like the Keyboard Range, Track Type,
Trigger Mode, Tension and Wrap Around.
Sound/Bank
Sound assigned to the Pad track.
Pad Type
Use this parameter to decide if the Pad will play once or if it will
loop.
Note: While in Pad Record mode, the pattern is always played back
in loop, even if this parameter is set to “One Shot”.
One Shot When you press one of the PAD buttons, the cor-
responding Pad is only played once. This is useful
for playing Hits or Sequences than must only play
once.
Loop When you press one of the PAD buttons, the cor-
responding Pad plays up to the end, then contin-
ues playing from the start. Press STOP in the PAD
section to stop it playing. This is useful for play-
ing cyclic sequences.
PAD
PAD
To Next Page
Loading...
Need help?
General
