42
Selecting and playing Styles
Tempo
Tempo
While a Tempo setting is saved with each Style or Performance, you can change it to be whatever you
like. You can use either of the following two methods.
• While the Tempo parameter is selected, use the TEMPO/VALUE controls to
change its value.
• When the Tempo parameter is not selected, keep the SHIFT button
pressed, and use the DIAL to change the Tempo. The selected tempo will
be shown in a small window.
• Press the UP and DOWN buttons at the same time to recall the saved
Tempo.
Intro, Fill, Variation, Ending
When playing Styles, you can select various “Style Elements” to make your playing richer. A Style is
made of up to four basic patterns (Variations), three Intros (or two Intros and a Count-In), three Fills
(or two Fills and a Break), and two Endings.
1 Make sure the SYNCHRO-START LED is turned on (otherwise, press the
button to turn it on).
2 Press one of the INTRO buttons to set the corresponding Intro to play.
3 Play the keyboard.
The Style starts with the selected Intro. When the Intro is
completed, the basic pattern (selected Variation) starts to
play.
To Next Page
Loading...
Need help?
General
