Korg PA1X User Manual

401
Installing ROM expansions
Appendix
Pa1X can be fitted with up to two dedicated Sound expansion boards. Please, check on www.korgpa.com, or contact your Korg dealer
for more information on the available options.
1. Before you begin, turn the instrument off, and disconnect the power cable.
2. Turn the instrument upside down, and remove the screws (a), to
open the cover (A) and gain access to the option compartment.
Note: Block any possible access to the inside of the instrument dur-
ing installation to prevent any items from falling inside. In the
event something does fall into the instrument, please immediately
contact your nearest Service Center.
3. As you face the option compartment opening, locate the two
ROM slots.
Installing ROM expansions
a
a
a
a
a
a
a
A
a
A
a
a
a
a
a
a
a
Pa1X Pro
Pa1X

Korg PA1X Specifications

General

Polyphony	62 voices
Sound Engine	HI synthesis (Hyper Integrated)
Display	TouchView graphical touch screen
Sequencer	16-track sequencer
Storage	floppy disk drive
Connectivity	MIDI In/Out/Thru, USB
Outputs	Headphones
Inputs	Microphone Input