69
Recording a new Song
Preparing to record
Quick Guide
3 Select the Backing Sequence (Quick Record) option and press OK to enter
the Backing Sequence Record mode.
Preparing to record
When you enter Backing Sequence Record, the most recently used Style is already selected, and all
tracks are ready to record. You could simply start recording as if you were playing in realtime with the
Styles. However, there are some settings that you may wish to edit.
• If you like, adjust any editable parameter in the display.
After choosing the Backing Sequence
(Quick Record) option, the Backing
Sequence Record page appears.
Press the Style param-
eter (or one the STYLE
buttons) to open the
Style Select window,
and select a different
Style (as seen on
page 40).
Track(s) status. ‘Rec’ means they are ready
to record. ‘Play’ means they are recorded
and you can hear them. ‘Mute’ means they
cannot be heard.
Measure counter. Neg-
ative numbers (-2, -1)
are the precount,
after which you can
start recording.
Style’s Tempo. Change
it, if you like.
Grouped tracks. During Quick Record, you cannot
access each separate Song track. For ease of use,
just two ‘master’ tracks are provided: Kbd/Pad (Key-
board/Pads) and Ch/Acc (Chord/Accompaniment).
Style’s Meter. You can-
not change it.
Press the Perf/STS
parameter to open
the Performance
Select window, and
select a different Per-
formance (as seen on
page 36). As an alter-
native, you use the
PERFORMANCE/
SOUND or STS but-
tons.
To Next Page
Loading...
Need help?
General
