Korg PA1X User Manual

407
Installing the MP3 Board (EXBP-MP3)
Precautions
Appendix
You can install a Korg EXBP-MP3 board into your Pa1X or Pa1X
Pro. This user-installable card will let your Pa1X and Pa1X Pro
play and record MP3 files, allowing for easy music data exchange
with any personal computer or stand-alone MP3 player.
Please note Korg is not responsible for any damage or injury caused by
incorrect installation of this card by unauthorized personnel.
Precautions
• Installation of the card is done at the user’s own risk. Korg will assume no
responsibility for any damage or injury resulting from its improper installa-
tion or use.
• Be sure to disconnect the instrument from the AC plug, before opening it.
• To prevent your body’s static electricity from damaging the board’s compo-
nents, touch an unpainted metallic component before proceeding with the
installation.
Part listing
Before beginning with the installation, please be sure all the following parts
are included with your kit. Some parts are needed only when installing the
board on a particular model, but not on others. In addition, you will need a
cross-point screwdriver (Pa1X/Pa1X Pro) and a 5.5mm hexagon wrench or a
pair of pliers (Pa1X Pro) (not supplied).
Note: The checkmark means the part is needed for the correspond-
ing instrument.
Installing the MP3 Board (EXBP-MP3)
Part name Pa1X Pro Pa1X
A Self-locking nuts √× 2
B Plastic spacers √× 4
C MP3 card √√× 1
DM3×6 screws √× 2
A
B
C
D

Korg PA1X Specifications

General

Polyphony	62 voices
Sound Engine	HI synthesis (Hyper Integrated)
Display	TouchView graphical touch screen
Sequencer	16-track sequencer
Storage	floppy disk drive
Connectivity	MIDI In/Out/Thru, USB
Outputs	Headphones
Inputs	Microphone Input