139
Song Play operating mode
Main page
Reference
Main page
Press SONG PLAY to access this page from another operating
mode.
To access this page from another operating mode, press the
SONG PLAY button.
Note: When switching from Style Play to Song Play, the Song Setup
is automatically selected, and various track parameters may
change.
To return to this page from one of the Song Play edit pages, press
the EXIT or SONG PLAY button.
To switch between Keyboard tracks (Normal view) and Song
tracks (Song Tracks views), use the TRK. SEL. (TRACK
SELECT) button. Pressed a first time, you will see tracks 1-8; a
second press will show tracks 9-16; pressed again, you will go
back to Keyboard tracks.
(See “Song Tracks 1-8 and 9-16 pages”
and “Volume panel” starting from page 142).
Page header
This line shows the current operating mode, transposition and
recognized chord.
Operating mode name
Name of the current operating mode.
Master transpose
Master transpose value in semitones. This value can be changed
using the TRANSPOSE buttons on the control panel.
Note: Transpose may be automatically changed when selecting a
different Performance. It may also be changed when loading a
Standard MIDI File generated with an instrument of the Korg Pa
series.
To avoid transposing, “lock” the Master Transpose parameter in the
Global (see “General Controls: Lock” on page 232), then write the
Global to memory (see “Write Global - Global Setup dialog box”
on page 257).
Recognized chord
Displays the recognized chord, when you play a chord on the
keyboard. If no chord abbreviation is shown, no chord recogni-
tion mode has been selected by using the CHORD SCANNING
buttons (see page 11).
Page menu icon
Press the page menu icon to open the menu. See “Page menu” on
page 155 for more information.
Songs area
This is where Song names are shown, together with parameters
depending on the selected type of Song.
• The following illustration shows parameters appearing when a
Standard MIDI Files has been selected.
• The following illustration shows parameters appearing when
an Audio CD Track has been selected.
• The following illustration shows parameters appearing when
an MP3 file has been selected.
Seq. 1/2
A different Song may be assigned to each of the two onboard
sequencers (Seq.1 and Seq.2). Each sequencer has its own
parameters.
Songs area Page header Page menu icon
Perf./
STS
area
Style
area
Key-
board
tracks
area
Panels
Operating mode
name
Master Transpose
(in semitones)
Recognized
chord
SB
Song name
Meter
Current mea-
sure
Tempo
Song type icon
Seq.1
Seq.2
Song name
Total
time
Elapsed time
All Songs
Song type icon
Seq.1
Seq.2
Song name
Total
time
Elapsed time
Song type icon
Seq.1
Seq.2
To Next Page
Loading...
Need help?
General
