122
Style Record mode
Export SMF
When programming a Chord Variation on an external
sequencer, please assign each Style track to the correct MIDI
channel, according to the following table.
Note: Only SMF in format 0 can be loaded.
From Song
This is the name of the Standard MIDI File to be loaded. Press
the Select button to open the file selector, and select an “.SMF”
file.
Select
Press this button to open the file selector and load the SMF.
Initialize
Check this parameter if you want all settings of the target Style
Element (i.e., Key/Chord, Chord Table, Sounds…) are reset
when loading the SMF.
Hint: It is a good idea to check the “Initialize” parameter when
importing the first Chord Variation of a Style Element, and
uncheck it when importing the following Chord Variations.
To E/CV
Use this parameter to select a target Chord Variation.
Execute
After setting all parameters in this page, press this button to
import the Standard MIDI File into the target Chord Variation.
Export SMF
The Export SMF function allows you to export a Chord Varia-
tion as a Standard MIDI File (SMF), and edit it on your pre-
ferred external sequencer.
To Song
This (non-editable) parameter shows the name of the Standard
MIDI File to be generated. The (automatically assigned) name
will be the same of the exported Chord Variation.
From E/CV
Use this pop-up menu to select one of the available Chord Varia-
tions from the current Style.
Execute
After selecting a Chord Variation, press this button to export it as
a Standard MIDI File. A standard file selector will appear. Select
the target device and directory, then press Save.
MIDI Channel(s) Pa1X Track
9 Bass
10 Drum
11 Percussion
12-16 Accompaniment 1-5
To Next Page
Loading...
Need help?
General
