81
Style Play operating mode
Volume panel
Reference
Selected Track Info area
This line lets you see the Sound assigned to the selected track.
Not only it is shown on the main page, but also in several edit
pages.
Track name
Name of the selected track.
Sound name
Sound assigned to the selected track. Press anywhere in this area
to open the Sound Select window, and select a different Sound.
Sound bank
Bank the selected Sound belongs to.
Program Change
Program Change number. Shown only when the “Show Program
Change number” parameter is turned on. (See page 234).
Sounds area
This area lets you see Sounds and octave transposition for the
eight Style tracks.
Style tracks octave transpose
Non editable. Octave transpose of the corresponding track. To
edit the octave transpose, go to the “Mixer/Tuning: Tuning” edit
page (see page 86).
Sound name
Name of the Sound assigned to the track. Touch a name a first
time to select the corresponding track (detailed information are
shown on the Selected Track Info area, see above). Touch it a sec-
ond time to open the Sound Select window.
Volume panel
Press the Volume tab to select this panel. This is where you can
set the volume of each track, and mute/unmute tracks.
Use the TRK. SEL. (TRACK SELECT) button to switch from
Normal view (Keyboard and grouped Style tracks, Mic/In con-
trols) to Style Tracks view (Style tracks).
If the VOLUME LED over the SLIDER MODE button is turned
on, the Assignable Sliders LEDs show which view is currently
selected.
The Normal view shows grouped Style tracks, Mic/In controls,
Keyboard tracks (upper sliders LED turned on):
The Style Tracks view shows individual Style tracks (lower slid-
ers LED turned on):
Virtual sliders (track volume)
Virtual sliders are a graphical display of each track’s volume. Use
the Assignable Sliders to change this value (provided the VOL-
UME LED is turned on above the SLIDER MODE button, see
below).
As an alternative, press the track’s area to select a track, and use
TEMPO/VALUE controls to change the value.
Assignable Sliders function
Use the SLIDER MODE button to select the function assigned to
the Assignable Sliders. When the VOLUME LED is turned on,
each Assignable Slider controls the volume of the corresponding
track.
Track name
Sound name
Sound bank
Program Change
Sty
Sty
Sty
Octave icon Sound name
Sty
Track status icon Virtual slider
Sty
To Next Page
Loading...
Need help?
General
