80
Style Play operating mode
Style Tracks view page
Keyboard tracks area
This is where Keyboard tracks are shown.
Sound name
Name of the Sound assigned to the corresponding Keyboard
track.
• If the track is already selected (white background), press the
Sound name to open the Sound Select window.
• If the track is not selected (dark background), first select it,
then press the Sound name to open the Sound Select window.
Sound bank
Bank the current Sound belongs to.
Program Change
Program Change number. Shown only when the “Show Program
Change number” parameter is turned on in Global mode. (See
page 234).
Keyboard track name
Non editable. Name of the corresponding track:
UP1 Upper 1
UP2 Upper 2
UP3 Upper 3
LOW Lower
Keyboard track octave transpose
Non editable. Octave transpose of the corresponding track. To
individually edit the octave transpose for each track, go to the
“Mixer/Tuning: Tuning” edit page (see page 86).
You can also transpose all Upper tracks by using the UPPER
OCTAVE buttons on the control panel.
Keyboard track status
Play/mute status of the current track. Select the track, then press
this area to change the track status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
/ When the icon of the Lower track is framed in
yellow, the Bass & Lower Backing function is
active (see page 96).
Panels
The lower half of the main page contains the various panels, you
can select by pressing the corresponding tabs. See more informa-
tion in the relevant sections, starting from page 81.
Style Tracks view page
Press the TRK. SEL. button to switch from the Normal view to
the Style Tracks view. In this view, individual Style tracks are
shown in the lower half of the display, while the upper half of the
main page changes, to show parameters for the Style tracks.
Press TRK. SEL. again to return to the Normal view (Keyboard
tracks, grouped Style tracks, Mic/In controls).
Original Style Sounds
This parameter lets you select different Sounds for the Style
tracks, other than those recorded in each Style Element pattern.
Sounds assigned when this parameter is checked are shown in
the Sounds area of this page.
Note: This parameter can be saved with the Performance or Style
Performance, and is automatically set to On or Off when you select
a different Performance or Style, depending on its saved status.
On Style tracks always use the original Sounds
recorded in each Style Element. If you assign a
different Sound to a Style track, this parameter is
automatically set to Off.
Off You can assign different Sounds to each Style
track, and save them in a Performance or Style
Performance. This becomes the only track’s
Sound for all Style Elements.
Sound
name
Track name
Sound
bank
Track’s octave
transpose
Track status
Volume panel
Tabs
Selected track
info area
Sounds area
Sty
To Next Page
Loading...
Need help?
General
