Leica FlexLine plus - Page 131

FlexLine plus, Coding
131
Code
New
To create a new code.
Attrib.
To add up to 8 attributes with up to 16
characters. Existing code attributes
can be overwritten with the following
exceptions:
The codelist editor of Instrument Tools
can assign a status to the attributes.
Attributes with status "fixed" are
write-protected. They cannot be over-
written or edited.
For attributes with status "Mandatory"
an input or a confirmation is required.
Attributes with status "Normal" can be
edited freely.

The *.cls in the \CODES folder of
the USB stick is not changed.
Edit
To edit quick code, description and
attributes.
Column Description
First column Code name
Second column Description of the code