Leica FlexLine plus - Measure Line & Offset

FlexLine plus, Programs
72
7.5.4 Measure Line & Offset
Description The Measure Line & Offset subprogram calculates from measurements or coordinates,
longitudinal offsets, parallel offsets and height differences of the target point relative
to the reference line.
Example of height
difference relative
to first reference
point
Access Press Meas in the Reference Line - Info screen.
Measure line &
offset
Next step • Either, press Meas to measure and record.
•Or, press Back to return to the Reference Line - Info screen.
P0 Instrument station
P1 Start point
P2 End point
P3 Measured point
P4 Reference point
d1  Offset
d2  Line
P1
P2
P3
d2
d1
P4
P0
TSOX_035
P1 Start point
P2 Target point
P3 Target point
a Reference height
d1 Height difference between start point
and the reference height
d2 Height difference between P2 and
the reference height
d3 Height difference between P3 and
the reference height
TSOX_037
a
d1
d2
d3
P1
P3
P2
Field Description
∆L Calculated distance longitudinal to the reference line.
∆O Calculated distance perpendicular from the reference line.
∆H Calculated height difference relative to the defined reference height.