FlexLine plus, Operation
39
4.5 Q-Survey Program
Description After switching on and setting up correctly, the instrument is immediately ready for
measuring.
Access Select Q-Survey from the Main Menu.
Q-Survey
Station
To enter station data and set the
station.
Set Hz
To set the orientation to a user
defined horizontal direction.
Hz / Hz
To set the horizontal angle reading to
the left (anticlockwise) or to the right
(clockwise).
Code
To find/enter codes. Refer to "9.1
Coding". Available on page 4/4 or
Code. Or, on any page, press the
FNC/Favourites key and select Coding.
To Next Page
Loading...
