Leica FlexLine plus - Offsets

FlexLine plus, Programs
98
7.11.4 Offsets
Access Select the desired COGO subapplication from the COGO Main Menu:
Distance Offset Use the Distance Offset subprogram to calculate the distance and offset of a known
point, with the basepoint in relation to a line.
Set Point by Distance
Offset
Use the Set Point by Distance Offset subprogram to calculate the coordinates of a
new point in relation to a line from known longitudinal and offset distances.
Plane Offset Use the Plane Offset subprogram to calculate the coordinates of a new point and its
height and offset, in relation to a known plane and offset point.
• DistOff • Set Pt • Plane
Known
P0 Instrument station
P1 Start point
P2 End point
P3 Offset point
Unknown
d1  Line
d2  Offset
P4 COGO (base) point
TSOX_104
d1
d2
P1
P0
P2
P3
P4
Known
P0 Instrument station
P1 Start point
P2 End point
d1  Line
d2  Offset
Unknown
P3 COGO point
TSOX_105
d1
d2
P1
P0
P2
P3
Known
P1 Point 1 which defines plane
P2 Point 2 which defines plane
P3 Point 3 which defines plane
P4 Offset point
Unknown
P5 COGO (intersection) point
d1 Offset
TSOX_106
d1
P1
P3
P2
P4
P5