FlexLine plus, MapView Interactive Display Feature
136
10.5 Selecting Points
Selecting a point
using the touch
screen step-by-step
Available for TS09 plus with C&T.
Step Description
1. Press Map in the screen where points must be selected.
2. Tap on the point to be selected.
When there are multiple points within the same area and the precise selec-
tion is unclear, tapping on the point will access Points Found.
3. Points Found
The ID and the type of the points within range of the point selection is
displayed.
Select the desired point.
View to display the coordinate and job details of the selected point.
4. Cont returns to previous screen with the focus on the selected point.
To Next Page
Loading...
