FlexLine plus, Coding
132
9.2 Quick Coding
Availability
Description Using quick coding, a predefined code can be called directly via the keypad on the
instrument. The code is selected by entering a two-digit number, the measurement is
then triggered and the measured data and code saved.
A total of 99 quick codes can be assigned.
The quick code number can be assigned when the code is created in the Coding
screen, in the Codelist Manager in Instrument Tools, or it is assigned in accordance
with the order in which the codes were entered, for example, 01 -> first code in the
code list ... 10 -> tenth code in the code list.
Access
Quick coding step-
by-step
Messages The following are important messages or warnings that may appear.
Instrument Tools Codelists can be easily created and uploaded to the instrument using the supplied
Instrument Tools software.
TS02 plus - TS06 plus TS09 plus
1. Select Programs from the Main Menu.
2. Select Survey from the Programs Menu.
3. Press Q-Code.
1. Press Q-Code.
2. Enter a two-digit number on the keypad.
A two-digit code must always be entered on the keypad even if only a
one-digit code was assigned.
For example: 4 -> enter 04.
3. The code is selected, the measurement triggered and the measured data and
code saved. The name of the selected code is displayed after the measurement.
4. Press Q-Code again to end quick coding.
Messages Description
Cannot edit attribute! Attribute with fixed status cannot be changed.
No codelist available ! No codelist in memory. Manual input for code and
attributes are called automatically.
Code not found! No code is assigned to the entered number.
To Next Page
Loading...
