Leica FlexLine plus - 12.5 Instrument Protection with PIN

FlexLine plus, Tools
144
12.5 Instrument Protection with PIN
Description The instrument can be protected by a Personal Identification Number. If PIN protection
is activated,the instrument will always prompt for a PIN code entry before starting up.
If a wrong PIN has been entered five times, a Personal UnblocKing (PUK) code is
required. This can be found on the instrument delivery papers.
Activate PIN code
step-by-step

Now the instrument is protected against unauthorised use. After switching on the
instrument, a PIN code entry is necessary.
Lock instrument
step-by-step
If PIN protection is activated, it is possible to lock the instrument from within any
program without switching off the instrument.
Entering the PUK
code
If a wrong PIN has been entered five times, the system will prompt for a Personal
UnblocKing code. The PUK code can be found on the instrument delivery papers.
If the PUK code entered is correct then the instrument will start up and reset the PIN
code to default value 0 and Use PIN-Code: Off.
Deactivate PIN code
step-by-step

The instrument is now no longer protected against unauthorised use.
1. Select Tools from the Main Menu.
2.
Select PIN from the Tools Menu.
3. Activate PIN protection by setting Use PIN-Code: On.
4. Enter a personal PIN Code (max. 6 numerics) in the New PIN-Code field.
5. Accept with Cont.
1. Press the FNC/Favourites key when within any program.
2. Select PIN-lock from the Favourites Menu.
1. Select Tools from the Main Menu.
2. Select PIN-lock from the Tools Menu.
3. Enter the current PIN in PIN-Code:.
4. Press Cont.
5. Deactivate PIN protection by setting Use PIN-Code: Off.
6. Accept with Cont.