Leica FlexLine plus - Page 44

FlexLine plus, Settings
44

This setting is not applicable for the program Tie
Distance or the favourites Hidden Pointand Height
Transfer. For these, the vertical angle is always
running and the value recorded is the value when
Store is pressed.
Language Sets the chosen language. Several languages can be uploaded onto
the instrument. The current loaded language(s) are shown.
A selected language can be deleted by pressing Delete. This function
is available if more than one language is installed, and the selected
language is not the chosen operating language.
Lang.Choice If multiple languages are loaded, a screen to choose the language can
be shown directly after switching on the instrument.
On The language screen is shown as the startup screen.
Off The language screen is not shown as the startup
screen.
Angle Unit Sets the units shown for all angular fields.
° ' " Degree sexagesimal.
Possible angle values: 0° to 359°59'59''
dec. deg Degree decimal.
Possible angle values: 0° to 359.999°
gon Gon. Possible angle values: 0 to 399.999 gon
mil Mil. Possible angle values: 0 to 6399.99 mil.

The setting of the angle units can be changed at any time. The
current displayed values are converted according to the selected unit.
Min. Reading Sets the number of decimal places shown for all angular fields. This
is for data display and does not apply to data export or storage.
°'" (0° 00' 0.1"/0° 00' 01"/0° 00' 05"/
0° 00' 10")
dec. deg (0.0001 / 0.0005 / 0.001)
gon (0.0001 / 0.0005 / 0.001)
mil (0.01 / 0.05 / 0.1)
Dist. Unit Sets the units shown for all distance and coordinate related fields.
meter Metres [m].
US-ft US feet [ft].
INT-ft International feet [fi].
ft-in/16 US feet-inch-1/16 inch [ft].
Dist.Decimal Sets the number of decimal places shown for all distance fields. This
is for data display and does not apply to data export or storage.
3 Displays distance with three decimals.
4 Displays distance with four decimals.
Temp. Unit Sets the units shown for all temperature fields.
°C Degree Celsius.
°F Degree Fahrenheit.
Press.Unit Sets the units shown for all pressure fields.
hPa Hecto Pascal.
mbar Millibar.
Field Description