Leica FlexLine plus - Page 87

FlexLine plus, Programs
87
Tie Distance Result -
Polygonal method
Next step Press ESC to exit the program.
NewPt 1
To calculate an additional line. The
program starts again at point 1.
NewPt 2
To set point 2 as the starting point of
a new line. A new point 2 must be
measured.
Radial
To switch to radial method.
Field Description
Bearing Azimuth between point 1 and point 2.
Grade Grade between point 1 and point 2.
 Slope distance between point 1 and point 2.
 Horizontal distance between point 1 and point 2.
 Height difference between point 1 and point 2.