LevelOne IGP-1271 - Page 116

109
Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but
only if more than one server has been configured.
 Key
The secret key - up to 63 characters long - shared between the TACACS+ server and
the switch.
Server Configuration
The table has one row for each TACACS+ server and a number of columns, which
are:
 Delete
To delete a TACACS+ server entry, check this box. The entry will be deleted during
the next Save.
 Hostname
The IP address or hostname of the TACACS+ server.
 Port
The TCP port to use on the TACACS+ server for authentication.
 Timeout
This optional setting overrides the global timeout value. Leaving it blank will use the
global timeout value.
 Key
This optional setting overrides the global key. Leaving it blank will use the global
key.
Adding a New Server
Click to add a new TACACS+ server. An empty row is added to the table, and the
TACACS+ server can be configured as needed. Up to 5 servers are supported.
The button can be used to undo the addition of the new server.
Buttons
 Apply:
Click to save changes.